su insmod /system/lib/modules/ath9k_htc.ko Alternatively, some kernels auto-load it. Check with lsusb or dmesg | tail to see if the adapter is recognized.
However, a question that surfaces daily on tech forums, Reddit, and XDA-Developers is: tplink tlwn722n driver android
usb 1-1: new high-speed USB device number 4 using xhci-hcd ath9k_htc: Firmware - htc_9271.fw loaded The adapter will appear as wlan1 (your internal Wi-Fi is wlan0 ). Enable it: su insmod /system/lib/modules/ath9k_htc
iw dev wlan1 scan | grep SSID Android’s GUI won’t let you connect via wlan1 . Use the command line: Enable it: iw dev wlan1 scan | grep
Introduction In the world of network penetration testing, high-gain Wi-Fi monitoring, and external antenna support, few devices have achieved the cult status of the TP-Link TL-WN722N . This small, affordable USB Wi-Fi adapter is famous for its excellent compatibility with Linux-based operating systems, primarily due to its use of the Atheros AR9271 chipset.
| App Name | Purpose | Requires Root | Works with TL-WN722N | |----------|---------|---------------|----------------------| | (Kali) | Full penetration testing suite | Yes | Yes (v1 only) | | Termux + iw , tcpdump | Command-line Wi-Fi scanning, monitor mode | Yes | Yes | | WiFi Analyzer (farproc) | Signal strength graphs | No | No (uses internal only) | | WPS Connect | WPS testing | Root recommended | Rarely | | Packet Injection (custom) | Deauth attacks | Yes | Yes (v1 with monitor mode) |
You should see an output like: