Evacuate non-essential personnel. Increase ventilation. Wear acid-resistant gloves (neoprene, nitrile), goggles, face shield, and apron.
Contact a licensed hazardous waste transporter. Nalco 73385 may qualify as RCRA hazardous waste code D002 (Corrosive - pH <2 or >12.5) . Some states also list molybdenum as a toxic metal. nalco 73385 msds
Ecolab / Nalco Water (Headquarters: St. Paul, MN, USA). Part 2: The Critical Difference – MSDS vs. SDS The keyword "Nalco 73385 MSDS" is still widely searched, but note: The Occupational Safety and Health Administration (OSHA) phased out MSDS in 2012 in favor of the 16-section SDS aligned with the Globally Harmonized System (GHS). Evacuate non-essential personnel
Prevent entry into drains, ditches, or surface water. Molybdate is moderately toxic to fish (LC50 50–200 mg/L for some species). Contact a licensed hazardous waste transporter
Introduction In the world of industrial water treatment, few chemicals are as specialized—and as potentially hazardous—as concentrated corrosion inhibitors. Nalco 73385 is one such product: a high-performance molybdate-based corrosion inhibitor used primarily in closed cooling water systems, chilled water loops, and engine jacket water systems. While the product is essential for preventing costly metal degradation, its chemical potency demands rigorous safety protocols.
– diluting to lower pH does not remove molybdenum from the waste stream.