Gyd9e Datasheet Access

No. Both motors share the same VMS supply. Use separate modules for different voltage requirements.

// Reverse at full speed digitalWrite(in1, LOW); digitalWrite(in2, HIGH); analogWrite(enA, 255); delay(2000); gyd9e datasheet

int enA = 9; int in1 = 8; int in2 = 7; void setup() pinMode(enA, OUTPUT); pinMode(in1, OUTPUT); pinMode(in2, OUTPUT); int enA = 9

8-bit (0–255) is typical with Arduino. The driver responds linearly up to 25 kHz. int in1 = 8