Fiat 0x08 «Safe»

The aftermarket has responded. Independent repair shops specializing in Italian cars now carry for Fiat modules. They can desolder the cracked solder joints on the EPS' microcontroller (the source of many 0x08 errors) and reflow them for $150—far cheaper than the $1,200 dealership replacement. Conclusion The Fiat 0x08 error code is intimidating, but it is rarely a death sentence for your car. In 80% of cases, the fix is a new battery or a cleaned ground wire. In 15% of cases, it is a corroded connector or broken wire. Only in the final 5% is it an actual module failure.

When your diagnostic tool displays , it is essentially saying: "The central computer (ECU) tried to communicate with the module at address 0x08, but no valid response was received." fiat 0x08

Intermittent 0x08 errors that clear themselves after driving over a bump. Fix: Remove, wire-brush, and reattach the ground strap. Apply dielectric grease. 3. CAN Bus Wiring Fault (High/Low Resistance) The CAN bus uses a twisted pair of wires (CAN High and CAN Low). A short between these wires, a cut, or a loose pin in a connector can isolate module 0x08 from the rest of the network. The aftermarket has responded