Published by CEN (European Committee for Standardization), this standard was officially adopted to fill a gap in the flooring industry. Traditional laminate standards assume a relatively flat, smooth surface. However, modern manufacturing techniques have introduced micro-grooves—tiny, machined channels (typically less than 1mm deep) that run along the edges or across the board surface to mimic the authentic look of hand-scraped wood or textured stone.
Whether you are manufacturing, specifying, or installing these floors, ignoring EN 17168 means accepting unknown risks—premature wear at the groove base, liquid damage, and potential slip hazards. By demanding compliance with EN 17168 (specifically with Groove Grade G1 and an appropriate AC rating), you ensure that your floor maintains its beauty and safety for decades, not just months.
| Feature | EN 13329 (Standard Laminate) | EN 17168 (Micro-Grooved Laminate) | | :--- | :--- | :--- | | | Flat, smooth | Machined micro-grooves (<2mm deep) | | Wear test | Abrasion wheels run flat | Modified test with forced groove wear | | Stain test | Surface application | Vacuum-assisted into groove | | Light fastness | Blue Wool 5 | Blue Wool 6 (stricter) | | Edge swelling | 24h test | 48h test (grooves trap moisture) | | Typical Use Class | AC3, AC4, AC5 | Primarily AC3 and AC4 (AC5 is rare due to groove stress) |
This article provides a comprehensive deep dive into EN 17168, including its scope, test methods, key requirements, and why it matters for your next project. EN 17168 is a European standard titled: "Laminate floor coverings — Laminate floor coverings with a micro-grooved surface — Specification, requirements and test methods."
If you have been searching for "EN 17168," you are likely dealing with a specific type of laminate flooring or decorative wall panel. Unlike broad standards such as EN 13329 (general laminate flooring), EN 17168 addresses a niche but growing market:
En 17168 -
Published by CEN (European Committee for Standardization), this standard was officially adopted to fill a gap in the flooring industry. Traditional laminate standards assume a relatively flat, smooth surface. However, modern manufacturing techniques have introduced micro-grooves—tiny, machined channels (typically less than 1mm deep) that run along the edges or across the board surface to mimic the authentic look of hand-scraped wood or textured stone.
Whether you are manufacturing, specifying, or installing these floors, ignoring EN 17168 means accepting unknown risks—premature wear at the groove base, liquid damage, and potential slip hazards. By demanding compliance with EN 17168 (specifically with Groove Grade G1 and an appropriate AC rating), you ensure that your floor maintains its beauty and safety for decades, not just months. en 17168
| Feature | EN 13329 (Standard Laminate) | EN 17168 (Micro-Grooved Laminate) | | :--- | :--- | :--- | | | Flat, smooth | Machined micro-grooves (<2mm deep) | | Wear test | Abrasion wheels run flat | Modified test with forced groove wear | | Stain test | Surface application | Vacuum-assisted into groove | | Light fastness | Blue Wool 5 | Blue Wool 6 (stricter) | | Edge swelling | 24h test | 48h test (grooves trap moisture) | | Typical Use Class | AC3, AC4, AC5 | Primarily AC3 and AC4 (AC5 is rare due to groove stress) | EN 17168 is a European standard titled: "Laminate
This article provides a comprehensive deep dive into EN 17168, including its scope, test methods, key requirements, and why it matters for your next project. EN 17168 is a European standard titled: "Laminate floor coverings — Laminate floor coverings with a micro-grooved surface — Specification, requirements and test methods." Whether you are manufacturing
If you have been searching for "EN 17168," you are likely dealing with a specific type of laminate flooring or decorative wall panel. Unlike broad standards such as EN 13329 (general laminate flooring), EN 17168 addresses a niche but growing market: